Dipping vessels for sampling

Product information "Dipping vessels for sampling"

For sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. With handle. Without lowering cable.
Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.
Emptying at the top via the open flaps.

Dimensions (ØxH):	75 x 427 mm
Ex protected:	Yes
Height:	427 mm
Manufacturer Article Number:	5365-1000
Material:	Brass
Nominal capacity:	1000 ml
UNSPSC:	24-12-20-02
Weight:	2300 g
Ø:	75 mm

Other customers also bought

Dipping bottle glass

For sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle.With Easy-Click for a rapid bottle exchangeWith handleHigh weight for fast loweringWithout lowering cableOperation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.

€0.00*

Details

Immersion Cylinders

For target spot and bottom samples of mineral oil products. Made of nickel-plated brass.Screw-off topWith handleHeavy design for fast loweringWithout lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.

€0.00*

Details

Mini immersion cylinders

For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Without lowering cable. Upper body unscrews for easy cleaning.

€0.00*

Details

Target immersion cylinder

With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. With 5 m venting tube. Screw off top enables easy cleaning.

€0.00*

Details

Dipping bottles Ex, for sampling flammable liquids

For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, nickel-plated.Screw-off bottle headWith handleHeigh weight for fast loweringWithout lowering cableOperation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.

€0.00*

Details

Accessories

Manually-operated reels and lowering cables

Manually-operated reelsHigh winding capacity of up 150 m for cable 2 mm dia.Reel width: inner 44 mm, outer 55 mm, reel diameter: inner 100 mm, outer 180 mmPlease order the required lowering cable separatelyLowering cablesFor dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materialsTensile load max. up to 10 kg

€0.00*

Details