Overhead stirrer EUROSTAR 60 digital
Product information "Overhead stirrer EUROSTAR 60 digital"
Universally used strong overhead stirrer for quantities up to 40l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.
- Digital speed display
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
| Clamping range: | 0.5 ... 10 mm |
|---|---|
| Depth: | 208 mm |
| Dimensions (WxDxH): | 86 x 208 x 248 mm |
| Display: | Digital |
| Height: | 248 mm |
| IP code: | IP 42 |
| Manufacturer Article Number: | 0004446000 |
| Max. Viscosity: | 50000 mPa·s |
| Max. clamping width: | 10 mm |
| Max. speed: | 2000 1/min |
| Max. stirring capacity: | 40 l |
| Max. torque: | 60 Ncm |
| Max. voltage: | 230 V |
| Min. clamping width: | 0.5 mm |
| Min. speed: | 0 1/min |
| Plug type: | EU |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Rated capacity: | 176 W |
| Speed: | 0 ... 2,000 1/min |
| Type: | EUROSTAR 60 digital |
| Type of auxiliary energy: | Mains connection |
| Weight: | 3.9 kg |
| Width: | 86 mm |
| With timer: | No |
Skip product gallery
Accessories
Bosshead R 270 for overhead stirrers
€0.00*
Claming range stand 25 to 36 mmClaming range extension arm 5 to 21 mm
Bosshead R 271 for overhead stirrers and Disperser T 50 digital ULTRA-TURRAX®
€0.00*
Claming range stand 34 mmClaming range extension arm 16 mm
Strap clamps RH 5 for overhead stirrers an Disperser T 50 digital ULTRA-TURRAX®
€0.00*
With R 270 bosshead. For vessel Ø 40 to 300 mm.
H-stand R 2722 for overhead stirrers and Disperser T 50 digital ULTRA-TURRAX®
€0.00*
Stable stands with H-shaped base. Stands have a levelling screw to compensate for unevenness on the laboratory bench. Max. load 10 kg.